Skip to content
LogIT Solutions LLC

Blank PVC ID cards (CR80)

Plain white plastic ID cards in the standard CR80 size: 85.60 x 53.98 mm and 0.76 mm (30 mil) thick, the same as a bank card. They fit Swiftpro, DNP and DASCOM card printers. Set a quantity, add them to your quote list, and we confirm stock and price.

HiCo magnetic stripeComposite PVC/PETWhite PVC, 0.76 mmAdhesive back
Size
CR80, 85.60 x 53.98 mm
Standard
ISO/IEC 7810 ID-1

Standard size and thickness

CR80 is the everyday ID card size. It is the ID-1 format in the ISO/IEC 7810 standard, so any printer, holder or reader made for ID cards takes it.

85.6053.98R3.180.76EDGE VIEW1234ALL DIMENSIONS IN mmISO/IEC 7810 ID-1 (CR80)
  1. 1Printable face, front and back
  2. 2Rounded corners, radius 3.18 mm
  3. 3Thickness 0.76 mm (30 mil)
  4. 4Magnetic stripe option, on the back
CR80 card dimensions
Size nameCR80 (ISO/IEC 7810 ID-1)
Width85.60 mm (3.370 in)
Height53.98 mm (2.125 in)
Thickness0.76 mm (30 mil)
Corner radius3.18 mm
MaterialPVC, white both sides

Thickness is often given in mil, which means thousandths of an inch. A 30 mil card is 0.76 mm. Thinner cards, around 10 mil, are used for stickers and labels.

Card holders, lanyard clips and wallets are made for this size, so a CR80 card fits them without trimming.

Card options compared

Four kinds of blank card. All are CR80 size and print in the same card printers.

Blank PVC card options compared
Plain white PVCWhat it addsNothing: a clean white face on both sidesWhat your printer needsAny CR80 card printerPick it forStaff, student and visitor photo IDs
HiCo magnetic stripe PVCWhat it addsA stripe on the back that stores data for swipe readersWhat your printer needsA magnetic stripe encoderPick it forSwipe-card systems, membership and loyalty cards
Composite PVC/PETWhat it addsA PET layer that keeps the card flat under heatWhat your printer needsAny CR80 printer; best on retransfer printersPick it forRetransfer printing and laminated cards
Adhesive-back thin PVCWhat it addsA peel-off sticky backWhat your printer needsA printer that takes thin cardsPick it forPutting a photo on a thick proximity card

Which one do I need?

Blank card chooser
Photo IDs for staff, students or visitorsPickPlain white PVC, 0.76 mmWhyThe standard card. Prints on both sides in any CR80 printer.
Cards for a retransfer printer or a laminatorPickComposite PVC/PETWhyStays flat under the heat of retransfer and lamination.
A card that swipesPickHiCo magnetic stripe PVCWhyHiCo stripes are harder to wipe by accident than LoCo.
A photo on a thick proximity cardPickAdhesive-back thin PVCWhyPrint it, peel it and stick it on the clamshell card.
A card that opens doors or clocks attendancePickMIFARE or proximity cardsWhyBlank PVC has no chip; readers need a card with one.

Blank PVC cards we supply

Set the quantity you need and add each card to your quote list.

Blank PVC card

Blank white PVC card, CR80, 0.76 mm (30 mil)

The standard plain white plastic ID card, the same size as a bank card. Print staff, student or visitor IDs on one or both sides in any card printer that takes CR80 cards.

Size
CR80 (ISO/IEC 7810 ID-1)
Dimensions
85.60 x 53.98 mm (3.370 x 2.125 in)
Thickness
0.76 mm (30 mil)
Corners
Rounded, radius 3.18 mm
Material
PVC, white both sides
Chip
None (print only)

Fits: Swiftpro K30, Swiftpro K30D, Swiftpro K60, Swiftpro K65, Swiftpro K65XL, DNP CX-D80SRS, DNP CX-D80DS, DNP CX-D80HS, DNP CX-D90HS

Listed from the maker's current range. Ask us to confirm stock.

HiCo

Magnetic stripe PVC card

White PVC card with HiCo magnetic stripe, CR80

A white CR80 PVC card with a high-coercivity (HiCo) magnetic stripe on the back, for systems that swipe cards. You need a printer with a magnetic stripe encoder, such as the Swiftpro K30D, to write the stripe.

Size
CR80 (ISO/IEC 7810 ID-1)
Thickness
0.76 mm (30 mil)
Stripe
HiCo (high coercivity), on the back
Encoding
Printer with a magnetic stripe encoder
Material
PVC, white

Fits: Swiftpro K30D

Listed from the maker's current range. Ask us to confirm stock.

PVC · PET

Composite PVC/PET card

Composite PVC/PET card, CR80, 0.76 mm

A white CR80 card made of PVC with a PET layer, so it stays flat under the heat of retransfer printing and lamination. DNP lists composite PVC among the card types its CX printers take.

Size
CR80 (ISO/IEC 7810 ID-1)
Thickness
0.76 mm (30 mil)
Material
Composite PVC with PET
Best for
Retransfer printing and lamination

Fits: DNP CX-D80SRS, DNP CX-D80DS, DNP CX-D80HS, DNP CX-D90HS

Listed from the maker's current range. Ask us to confirm stock.

Adhesive-back PVC card

Adhesive-back thin PVC card, CR80

A thin white CR80 PVC card with a peel-off sticky back. Print it in your card printer, then stick it onto a thick proximity card that cannot go through the printer.

Face size
CR80, 85.60 x 53.98 mm
Thickness
Thin card: we check it against your printer's minimum
Back
Adhesive with peel-off liner
Use
Photo label for clamshell proximity cards

Listed from the maker's current range. Ask us to confirm stock.

PVC cards: common questions

What size is a standard ID card?

A standard ID card is CR80 size: 85.60 x 53.98 mm (3.370 x 2.125 inches), with rounded corners of 3.18 mm radius. This is the ID-1 size in the ISO/IEC 7810 standard, the same size as a bank card.

How thick is a standard ID card?

A standard PVC ID card is 0.76 mm, also called 30 mil. Most card printers take thinner and thicker cards too; the Swiftpro K30, for example, takes cards from 0.25 to 1.00 mm.

Will these cards work in my printer?

CR80 white PVC cards fit Swiftpro, DNP and DASCOM card printers. DNP lists PVC, composite PVC, PET-G and ABS for its CX printers. Send us your printer model if you are not sure.

Should I buy PVC or composite cards?

Plain PVC is fine for most direct-to-card printing. Composite PVC/PET cards stay flatter under heat, so they suit retransfer printers and cards that will be laminated.

Can I add a chip to a blank PVC card later?

No. The chip and antenna are built into the card when it is made. If your doors or attendance readers need to read the card, order MIFARE or proximity cards instead; they are white PVC on the outside and print the same way.

Do you supply cards with a magnetic stripe?

Yes, white CR80 PVC cards with a HiCo magnetic stripe. To write the stripe you need a printer with a magnetic stripe encoder, such as the Swiftpro K30D.

See all ID card supplies, or find the right ribbon for your printer.

Tell us how many cards you need.

Send the quantity and your printer model, or add the cards to your quote list. We reply with prices and stock.

WhatsApp us+971 50 889 5653
Company
LogIT Solutions LLC
Office
Dubai Silicon Oasis
In business
13+ years
Offices
UAE · India · Kenya