Skip to content
LogIT Solutions LLC

MIFARE smart cards: Classic and DESFire

MIFARE cards carry an NXP chip that a reader reads at 13.56 MHz when you tap the card. For a new system, pick DESFire EV3. To add cards to a system you already have, match the type it uses. The cards listed here are white PVC, so you can print them in your ID card printer.

Classic 1KClassic 4KDESFire EV2DESFire EV3
Frequency
13.56 MHz
Standard
ISO/IEC 14443 A

Which MIFARE card do I need?

Start from your system. A card is only useful if your readers are set up to read its type.

MIFARE card chooser
A new access control or attendance systemPickDESFire EV3WhyThe current NXP card: AES-128 on an EAL5+ certified chip.
More cards for a site already on DESFire EV2PickDESFire EV3 or EV2WhyNXP says EV3 has a backward mode for EV2. We check your reader settings first.
More cards for a site on MIFARE Classic 1KPickClassic EV1 1KWhyMatch what your readers and software already read.
A Classic system that stores extra data on cardsPickClassic EV1 4KWhyFour times the memory of 1K, same technology.
Cheaper cards for a basic door systemPick125 kHz proximity cardsWhyOnly if your readers are 125 kHz. They are less secure.

Classic 1K and 4K vs DESFire EV2 and EV3

All four use 13.56 MHz and the ISO/IEC 14443 Type A standard. The differences are memory, security and where NXP stands on each.

MIFARE Classic and DESFire cards compared
MIFARE Classic EV1 1KMemory1 KB (16 sectors)SecurityCRYPTO1NXP statusNot recommended for new designsPick it whenYour site already uses Classic 1K
MIFARE Classic EV1 4KMemory4 KBSecurityCRYPTO1NXP statusNot recommended for new designsPick it whenYour Classic system needs more memory
MIFARE DESFire EV2Memory2 KB to 32 KB optionsSecurityAES-128, Common Criteria EAL5+NXP statusNot recommended for new designs; successor is EV3Pick it whenYour site already uses EV2
MIFARE DESFire EV3Memory2, 4, 8 or 16 KBSecurityAES-128, Common Criteria EAL5+ (hardware and software)NXP statusCurrentPick it whenYou are starting a new system

Source: NXP product pages for MIFARE Classic EV1, DESFire EV2 and DESFire EV3, checked November 2026.

What is inside a MIFARE card

13.56 MHz85.6053.98R3.180.76EDGE VIEW1234ALL DIMENSIONS IN mmISO/IEC 7810 ID-1 (CR80)
  1. 1NXP MIFARE chip, sealed inside the card
  2. 2Antenna coil, read at 13.56 MHz
  3. 3White face you can print on
  4. 4ISO thickness, about 0.76 mm

The chip and a wire antenna are sealed between layers of white PVC. You cannot see them, and the card prints like a plain PVC card.

When you hold the card at a 13.56 MHz reader, the reader powers the chip through the antenna and reads it. No battery is needed.

MIFARE cards we supply

White printable CR80 cards with NXP chips. Set the quantity and add each card to your quote list.

MIFARE DESFire EV313.56 MHz · ISO 14443 A

MIFARE DESFire card

MIFARE DESFire EV3 card (NXP chip), white PVC

The current secure MIFARE card from NXP, with AES encryption and a Common Criteria EAL5+ certified chip. Pick it for a new access control or attendance system; it also works in EV2 and EV1 compatibility mode.

Chip
NXP MIFARE DESFire EV3
Memory
2, 4, 8 or 16 KB (ask for the size you need)
Frequency
13.56 MHz
Standard
ISO/IEC 14443 Type A
Security
AES-128; Common Criteria EAL5+ (hardware and software)
Compatibility
Backward mode for DESFire EV2, EV1 and D40
Card
White PVC, CR80, printable
Readers
13.56 MHz readers with DESFire support

Listed from the maker's current range. Ask us to confirm stock.

MIFARE DESFire EV213.56 MHz · ISO 14443 A

MIFARE DESFire card

MIFARE DESFire EV2 card (NXP chip), white PVC

A secure 13.56 MHz smart card with AES encryption, for sites already set up for DESFire EV2. NXP now lists EV2 as not recommended for new designs and names DESFire EV3 as its successor.

Chip
NXP MIFARE DESFire EV2
Memory
2 KB to 32 KB options (ask for the size you need)
Frequency
13.56 MHz
Standard
ISO/IEC 14443 Type A
Security
AES-128; Common Criteria EAL5+
NXP status
Not recommended for new designs; successor DESFire EV3
Card
White PVC, CR80, printable
Readers
13.56 MHz readers with DESFire support

Listed from the maker's current range. Ask us to confirm stock.

MIFARE Classic 1K13.56 MHz · ISO 14443 A

MIFARE Classic card

MIFARE Classic EV1 1K card (NXP chip), white PVC

A white printable CR80 card with an NXP MIFARE Classic EV1 1K chip, read at 13.56 MHz. Choose it to add cards to an existing MIFARE Classic system; NXP does not recommend Classic for new designs.

Chip
NXP MIFARE Classic EV1 1K (MF1S50)
Memory
1 KB (16 sectors of 4 blocks)
Frequency
13.56 MHz
Standard
ISO/IEC 14443 Type A
Security
MIFARE CRYPTO1
NXP status
Not recommended for new designs
Card
White PVC, CR80, printable
Readers
13.56 MHz readers with MIFARE Classic support

Listed from the maker's current range. Ask us to confirm stock.

MIFARE Classic 4K13.56 MHz · ISO 14443 A

MIFARE Classic card

MIFARE Classic EV1 4K card (NXP chip), white PVC

The same MIFARE Classic technology as the 1K card with four times the memory, for sites that store more data on each card. NXP does not recommend Classic for new designs.

Chip
NXP MIFARE Classic EV1 4K (MF1S70)
Memory
4 KB
Frequency
13.56 MHz
Standard
ISO/IEC 14443 Type A
Security
MIFARE CRYPTO1
NXP status
Not recommended for new designs
Card
White PVC, CR80, printable
Readers
13.56 MHz readers with MIFARE Classic support

Listed from the maker's current range. Ask us to confirm stock.

MIFARE cards: common questions

What is the difference between MIFARE Classic and DESFire?

Both are NXP chips read at 13.56 MHz. MIFARE Classic uses NXP's older CRYPTO1 security and NXP no longer recommends it for new designs. MIFARE DESFire EV3 uses AES-128 encryption on a Common Criteria EAL5+ certified chip and is the one to pick for a new system.

Are MIFARE cards the same as RFID cards?

MIFARE cards are one kind of RFID card. "RFID card" covers any card read by radio, including 125 kHz proximity cards; MIFARE cards work at 13.56 MHz and follow the ISO/IEC 14443 Type A standard.

Will MIFARE cards work with my Suprema or HID reader?

They work if the reader has a 13.56 MHz card option that supports the same MIFARE type: Classic or DESFire. Check the card row on the reader's datasheet, or send us the model and we check it for you.

Is MIFARE Classic secure enough?

For a new system, no: NXP lists MIFARE Classic EV1 as not recommended for new designs and points buyers to DESFire. Classic cards make sense when you are adding cards to a site that already runs on Classic.

What memory size do I need?

For door access and attendance, the smallest size your system supports is usually enough, because the reader often stores only a card number. Choose a larger DESFire memory only if the card will also carry other applications, such as cashless payment.

Can I print on MIFARE cards?

Yes. The MIFARE cards we list are white PVC on the outside, so they print in Swiftpro, DNP and DASCOM card printers like any CR80 card. The chip stays sealed inside the card.

Using 125 kHz readers? See proximity cards and key fobs. Printing the cards too? See ribbons and film and all ID card supplies. Read MIFARE vs proximity cards.

Send us your reader model. We match the card.

Tell us your reader and how many cards you need, or add them to your quote list. We check the card type before we quote.

WhatsApp us+971 50 889 5653
Company
LogIT Solutions LLC
Office
Dubai Silicon Oasis
In business
13+ years
Offices
UAE · India · Kenya